PTFE Garment Film water pump seal
Our sales have covered more than 90% of the domestic high-grade
fabric film, air film, cable film and other well-known production
units. Equipment in Korea MIRCO-ONE, Japan DAIKIN Company, China's
SINOMA Group, Dongyue Group and other world-class enterprises
PTFE microporous garment film
Polytetrafluoroethylene (PTFE) garment film is made of PTFE as raw
material by special technology. After calendering, extrusion and
biaxial stretching, the micro-porous film is first made, and then
the film is compounded with viscose on various specifications of
textile fabrics to form PTFE composite fabrics. The secondary
fabrics have the special effects of waterproof, moisture
permeability, wind proof and warmth retention.
Its performance is as follows:
1. Waterproof performance
Waterproof means that the water on the outside of the fabric will
not penetrate the fabric and soak into the inside. PTFE laminated
composite fabrics are waterproof even under 80 lb/m2 pressure.
People will not feel wet even if they stand in the storm and sit on
the wet surface. The main reason why the fabric garment has such a
magical function is that the micropore diameter of PTFE film is
1/5000-1/20000 of the diameter of water droplets, so even the
smallest raindrops can not pass through. The surface energy of PTFE
is low, and the water droplets can not spread on the film to
prevent the water droplets from penetrating.
2. Moisture permeability:
The average pore size of PTFE film is 0.2 um. The pore size of PTFE
film is 700 times larger than that of water vapor molecule. Water
vapor molecule can pass freely.
3. Windbreak Performance
During the stretching process of PTFE film, microporous structure
is formed, which connects the nodes with numerous microfibers.
Pores are formed between microfibers. Pores are connected with each
other to form a unique network structure. Wind can not pass
directly, encounter obstruction will change direction, effectively
prevent air penetration, so it has excellent windproof performance.
4. Warmth retention
PTFE film has excellent moisture permeability. It can transfer the
vapor discharged from human body to microclimate in time, prevent
the vapor from condensing into liquid water, and reduce the
possibility of water conducting heat. Although the surface of the
film is dense with a large number of micro-holes, the wind can not
penetrate, effectively preventing air convection. The test results
show that the warmth retention effect of PTFE composite fabric is
30-40% higher than that of traditional down jacket in 25 m/s gale.
5. Biochemical Performance of Nuclear Protection
PTFE thin films have smaller pore size (average pore size is 0.2
um), which prevents the penetration of some toxic gases or
aerosols. Low surface can prevent the penetration of some toxic
liquids. The material with high water vapor flux without pore is
coated on one side of the film to realize the selective permeation
of water vapor and achieve the purpose of complete protection. The
nuclear biochemical protective clothing processed with PTFE
composite fabrics has many functions such as waterproof, moisture
permeability, wind proof, nuclear biochemical proof and so on.
Main technology parameters
|Hydrostatic pressure kPa||Rolling (metre)|
|Pre composite||After composite||Pre composite||After composite||400－500|
Membrane color: white
Its main applications are
It is widely used in sports clothing, cold-proof clothing,
military, fire protection, public security, medical care,
biochemical and other special clothing, shoes and hats, gloves,
sleeping bags, tents and so on.
High porosity and stable microporous structure
PTFE garment film has interlaced microporous structure of fibers.
Through biaxial stretching process and heat setting treatment at
high temperature, the microporous structure is stable and dust
particles can be effectively intercepted.
Surface filtration mechanism, easy dust removal
Membrane aperture is small and uniform.
Strong hydrophobicity, low surface energy, good non-adhesion
ability, effective removal of dust accumulated on the surface,
water washing or back blowing can restore performance, prolong
The filtration efficiency can reach 99.999995%.
With high filtration efficiency, PTFE garment membrane has better
filtration performance than other filter materials.
Famous client factory
PTFE biaxial stretching film is used for fabrics. The thickness of
the film is about 25-35 um, the porosity is 82%, the average pore
size is 0.3 um, the pore size range is 0.2-0.5 um, which is less
than the minimum value of light fog (20-100 um), but much larger
than the molecular diameter of water vapor (0.0003-0.0004 um), so
that water vapor can diffuse through these permanent physical
micropore channels, while water droplets can not pass through. At
the same time, PTFE film is water-repellent, so this film has
excellent waterproof and moisture permeability, at the same time,
the film has strong wind-proof performance. After pasting with
other fabrics, it has become a widely used garment fabric.
The clothing fabrics after PTFE biaxial stretching film lamination
are widely used in sportswear, cold-proof clothing, outdoor tourist
goods, rainwear fabrics, special protective clothing such as fire
protection, biochemical protection, poison prevention and water
immersion operation, military and medical clothing, shoes, hats,
gloves and other accessories, sleeping bags, tents and other
Waterproof breathable fabric
Its hydrostatic resistance is over 50 KPa. The moisture
permeability is more than 5000g/m2.d, and the air permeability is
less than 0.5ml/cm2.s. Its waterproof, moisture permeability,
wind-proof and warmth-keeping functions are the best among all
kinds of fabrics nowadays. It can be widely used to make special
protective clothes, immersion work clothes, cold-proof clothes and
Functional laminated composite fabrics are made by laminating
fabrics, PTFE microporous membranes and lining materials with high
technology and equipment. Its hydrostatic pressure is more than 50
KPa, its moisture permeability is more than 5000 g/.d, and its air
permeability is less than 0.5 ml/c.s. Its water-proof, moisture
permeability, bacteria-proof, wind-proof and warmth-keeping
properties are the best among all kinds of plants today. It can be
widely used in waterproof, medical, sports and leisure and other
special protective clothing, such as immersion suit, anti-bacteria
isolation suit, ski suit, etc.
Zhangjiagang Lvhuan Machinery Co., Ltd. is the leader of PTFE
calendering equipment manufacturing technology. In PTFE processing,
our company has introduced SFFD400 PTFE sealing tape production
line, SFFD600 PTFE micro-porous film extrusion calendering
substrate unit, SFFD800 PTFE high strength film calendering unit,
which has effectively promoted the progress of PTFE (dispersant)
Our company is the first company in Asia to develop and apply
hydrostatic bearing technology on PTFE calender. Our equipment has
been recognized by leading users in related fields worldwide. For
example, France AXON Company, Japan DAIKIN Company, Nanjing SINOMA,
Zhejiang Guotai CPS, Tianjin Tiansu, Shenzhen Tsinghua University,
Jinan University, Shandong Dongyue Group PTFE raw material
manufacturer, Sichuan Chengguang Group, and a series of scientific
research institutions in the field of global PTFE are
recognized.Our continuous technological updates and accumulated
experience and technical reserves to serve the world's top users
have prompted us to continue to maintain our advantages in the
manufacture of PTFE-related equipment. And will continue to promote
our research and development, cable, lithium battery materials, air
filter membranes, clothing fabric membranes and other new materials
in the application of continuous advantages.
Lvhuan Machinery will continue to strive to make greater
contributions to the processing equipment of PTFE products!
Equipment real figure
The actual case picture